• RU
  • icon Waiting For Moderation: 1
Menu

Hotel for 27 persons - Standard project 284-5-52C - Course project

Description

Hotel for 27 persons_Standard project 284-5-52S Course project

 

We offer you a course project on the topic "Hotel - for 27 persons" Tver

 

developed on the basis of the assignment and passport of the standard project "284-5-52S".

 

Design and construction is carried out: construction area city of Tver, moderate continental climate, snow region 4th, loamy soils.

 

The designed building dormitory - frameless (with load-bearing walls), intended for The hotel for 27 persons is intended for short-term accommodation of people

 

Building characteristics:

 

Dimensions in plan - 25600 mm length (+800); width 14300 mm (+800).

 

Building height - 10300 mm; floor height - 2800 mm.

 

Building area – 413.18 m2

 

Presence of a basement or technical underground – The sleeping block includes a technical underground.

 

Based on the volumetric planning solution, a technical and economic plan for the building has been drawn up – you will be able to familiarize yourself with this in the course project.

 

The structural scheme of the building is frameless. The load-bearing structures of the building are the external walls and internal load-bearing walls 640 mm wide, which can be longitudinal and transverse. External load-bearing and self-supporting walls are internal longitudinal and transverse walls that form apartments, floor slabs, foundation, entrance unit, technical underground, staircase unit, loggias, technical room and attic.

 

A foundation made of FBS blocks

 

is a type of strip foundation.

 

. The width of the sole is 1400 mm t 1000.

 

The foundation made of FBS blocks is a type of strip foundation

 

Floors. Hollow-core floor slabs. Length - 6380 mm, 3480 mm, 4780; width - 1790 (1490 and 990)

 

Staircases and landings were taken from GOST. (see drawings)

 

Roof - gable.

 

) The angle of inclination is 28 degrees, there is a pronounced ridge, dormer windows. The drain is external, organized.

 

Roofing – metal tiles (thickness 3.5-5 mm)

 

Waterproofing – anti-condensation film - 0.16 mm

 

(Lathing 100x35 mm, 350 mm step, counter-lathing timber 50x50) Walking boards (flooring made of slabs)

 

Insulation – 180 mm

 

Vapour barrier – 1 layer – Linokrom TPP – 3.5 mm

 

Reinforced concrete floor slab – 220 mm.

 

Window height – 1510 mm; Width – 1510 and 1210, and 1320.

 

Entrance door: width – 1415, height 2085. (10th entrance, 9th interior, 8th kitchen)

 

Internal: Width 910, height 2070

 

Doors to bathrooms: Width 710, height 2070 (this is the height of the entrance door with a floor height of 2.8)

 

Floors: block parquet; ceramic tiles in bathrooms and showers.

 

General plan:

 

The designed building in the plan has an area of ​​413.18 m.

 

Dimensions

 

and shape in the general plan: horizontal: tied to the red line

 

.

 

General plan:

 

The designed building in the plan has an area of ​​413.18 m.

 

Dimensions and shape in the general plan: horizontal: tied to the red line. (the red line is the road line - on the side or above (in this project) the building - at a short distance) Vertical - on the drawing to the conventionally accepted horizontals.

 

Operation to the general plan: the designed building is made of brick, with an area of ​​413.18 m2, parking for cars is designated by the number 2, it is made of asphalt with an area of ​​225 m2, the site for garbage removal, with containers, number 3, has an area of ​​3.25 m2.

 

Technical and economic performance to the general plan: table.

Project's Content

icon
icon
icon Poyasnitelnaya zapiska Гостиница на 27 мест_Типовой проект 284-5-52С .bak
icon Poyasnitelnaya zapiska Гостиница на 27 мест_Типовой проект 284-5-52С .dwg
icon Screenshot_1.jpg
icon Screenshot_2.jpg
icon Гостиница на 27 мест_Типовой проект 284-5-52С Курсовой проект.bak
icon Гостиница на 27 мест_Типовой проект 284-5-52С Курсовой проект.dwg
The material is an archive with files that can be opened in programs:
  • WinRAR
  • AutoCAD or DWG TrueView
  • Program for viewing images
up Up