Diesel start-up automatic valve
- Added: 23.09.2017
- Size: 489 KB
- Downloads: 3
Description
Diesel start-up automatic valve opens under compressed air pressure. Valve pos. 3 spring pos. 6 is pressed tightly to the body end face (pos. 1. Nippel pos. 2 is clamped between housing pos. 1 and cap (pos. 4 and sealed with leather gaskets, pos. 5.When diesel is started, compressed air is supplied from air distributor through threaded hole of nipple, pos. 2 to the housing cavity, pos. 1 and passes through longitudinal grooves on the valve rod. 3. Under compressed air pressure the valve overcomes resistance force of spring pos. 6 opens. As soon as air distributor stops air supply, spring pos. 6 press the valve (pos. 3 to the end face of the housing, pos. 1 and disconnect the engine cylinder cavity from the valve cavity.
Project's Content
|
|
Клапан.m3d.bak
|
Корпус.m3d.bak
|
Ниппель.m3d.bak
|
Сборка.a3d.bak
|
Сборка.a3d
|
Гайка.m3d
|
Клапан.m3d
|
Колпак.m3d
|
Корпус.m3d
|
Ниппель.m3d
|
Additional information
Гайка.m3d
Клапан.m3d
Колпак.m3d
Корпус.m3d
Ниппель.m3d
Similar materials
- 19.04.2021
- 29.08.2014