Design of Concrete Works Technology - Technological Processes in Construction

MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION
NOVOSIBIRSK STATE UNIVERSITY OF ARCHITECTURE AND CIVIL ENGINEERING (SIBSTRIN)
Department of CBT Explanatory Note
to the course design in the discipline: technological processes in construction
On the topic: DESIGN OF CONCRETE WORK TECHNOLOGY
Novosibirsk 2020

Design Brief
1) Concreting of basement walls.
2) Dimensions in axles:
A-B=6 m; 1-2=6 m;
B-B=3 m; 2-3=6 m;
B-D = 3 m; 3-4=6 m;
D-D = 3 m; 4-5=3 m;
D-E = 3 m.
3) Wall thickness – 700 mm.
4) Wall height – 3.2 m.
5) The construction period is summer.
6) Work conditions are favorable.
7) Place of construction – Novosibirsk.
8) Formwork – PERI TRIO.
Content
1. Input
2. Definition of the scope of work
3 Arrangement of formwork works with the development of schemes for the arrangement of panels and load-bearing elements of the formwork
4. Technology and organization of work
4.1. Formwork works
4.2. Reinforcement works
4.3. Feeding, laying and compaction of concrete mixture
4.3.1. Selection of technological transport for the delivery of concrete mixture
4.3.2. Selection of the method of supplying and placing the concrete mixture in the structure
4.3.3. Compaction of concrete mixture
4.4. Concrete care. Dismantling of formwork
5. Comparison of concreting options for the structure
6. Production calculation of labor costs and wages
7. Work schedule
8. Occupational Health and Safety Measures
9. Quality Control and Acceptance of Works
10. Technical and economic indicators
11.References
Application

Composition: Scheme of concrete laying with a crane and a bucket; Section 1-1; Formwork layout scheme; Node A; Node B; Node C; Node B; Compaction of concrete mixture with a vibrator; Specification;