clamp for bushing of KAMAZ 740 rocker

Added: 19.12.2019
Size: 216 KB
Downloads: 0

Find out how to download this material

Telegram bot for searching materials

Drawings purchasing

Subscribe to receive an information about new materials:

t.me/alldrawings

vk.com/alldrawings

Description

To restore the hole in the bushing of the valve rocker, it is necessary to attach the bushing on the machine, this will require a clamp of the rocker bushing. For unloading of machine units from one-way applied force, it is advisable to use devices with deformable elements. Clamp of rocker sleeve. This arrangement provides a reliable clamp and easy access to the grinding site. This arrangement slightly reduces the labor input by installing the part on the machine. During serial grinding of the hole in the rocker arm bushing, this device does not need to be removed after the operation. You just need to loosen the tightened clamp bolts, install a new part, and tighten the clamp bolts. In this regard, this arrangement is most advantageous in this processing method, since it significantly reduces the operation time and facilitates the operation of the turner and grinder.