RU
Waiting For Moderation: 0

Menu

Drawings Drawings content Pictures

Total: 71824

Support Angle - 3D Model

Support Angle - 3D Model

Added: 01.05.2015
Size: 79 KB
Downloads: 0

Find out how to download this material

telegram_icon

Telegram bot for searching materials

telegram_icon

Drawings purchasing

Subscribe to receive an information about new materials:

telegram_icon

t.me/alldrawings

vk_icon

vk.com/alldrawings

Description

3D model in Solidworks. Author - Michael

Project's Content

199.rar [ 79 KB ]

199

Corner.SLDPRT [ 183 KB ]

Corner.SLDPRT.1.__gcx3d__.hsf [ 10 KB ]

Similar materials

Support for the device adjustable by inclination angle

25.10.2022

Support for the device adjustable by inclination angle

The design of the main battle tank weighs 45 tons, with a maximum speed of 70 kilometers per hour and a lifting angle of 30 degrees. Calibration calculation of the support roller with the track

25.01.2023

The design of the main battle tank weighs 45 tons, with a maximum speed of 70 kilometers per hour and a lifting angle of 30 degrees. Calibration calculation of the support roller with the track

TTK Installation of intermediate reinforced concrete support through old intermediate AP-support - typical Job Instruction

24.04.2014

TTK Installation of intermediate reinforced concrete support through old intermediate AP-support - typical Job Instruction

Support. Grounding of support

09.08.2014

Support. Grounding of support

Corner anchor support of UIA 7. Support No. 3

07.12.2016

Corner anchor support of UIA 7. Support No. 3

Intermediate support P11 Support No. 2

07.12.2016

Intermediate support P11 Support No. 2

TTK Installation of single-line reinforced concrete support using falling boom (instead of dismantled wooden intermediate support) - typical Job Instruction

24.04.2014

TTK Installation of single-line reinforced concrete support using falling boom (instead of dismantled wooden intermediate support) - typical Job Instruction

Support frame and frame support

09.04.2012

Support frame and frame support

Free downloading for today

Update after: 17 hours 14 minutes

Geared motor KEB _ ZG4 2DA 132S4

12.01.2015

Geared motor KEB _ ZG4 2DA 132S4

Typical design B1.036.2-29.00 Doors special steel, firefighting (Out 0)

23.08.2014

Typical design B1.036.2-29.00 Doors special steel, firefighting (Out 0)

Office with laboratory for mills

24.03.2012

Office with laboratory for mills

Projection Part Drawing

18.02.2018

Projection Part Drawing

Other materials

Drawing of accumulator tank and deaeration column of deaerator DA 100/50

15.06.2018

Drawing of accumulator tank and deaeration column of deaerator DA 100/50

Diagram of mounted equipment on tractor

21.10.2011

Diagram of mounted equipment on tractor

NEC - Quanta CH1 - rev 2A - Notebook Motherboard Diagram

29.08.2014

NEC - Quanta CH1 - rev 2A - Notebook Motherboard Diagram

Rear axle design ZIL 433 - drawings

30.08.2014

Rear axle design ZIL 433 - drawings

Up