Course project on the topic: "Designing a two-stage helical gearbox with oblique teeth"
- Added: 04.03.2023
- Size: 3 MB
- Downloads: 1
Find out how to download this material
Subscribe to receive an information about new materials:
Description
State Maritime University of Sea and River Fleet named after adm. S.O. Makarova Department of Fundamentals of Engineering Design Course project in the discipline "Machine Parts and Design Fundamentals" On the topic: "Designing a two-stage helical gearbox with oblique teeth" St. Petersburg 2021
Data for calculation:
Power: 12 kW Engine speed: 750 rpm Gear ratio: i = 28
Composition: PZ, Reducer (SB), Specification, Detailing (high-speed shaft, intermediate shaft wheel, low-speed shaft wheel, low-speed through cover, oil indicator, intermediate shaft, inspection hatch, low-speed shaft, high-speed shaft gear, intermediate shaft gear)
CAD: KOMPAS-3D 18.1
Project's Content
3 Мой тихоходный вал.cdw
|
эпюры промежуточного вала.frw
|
Сборка.cdw
|
7 Крышка глухая выходного вала.cdw
|
эпюры тихоходного вала.frw
|
эпюры тихоходного вала.frw.bak
|
13 крышка сквозная тихоходная.cdw
|
5 Мой колесо промежуточного вала.cdw
|
Пояснительная записка.docx
|
1 Мой быстроходный вал.cdw
|
6 Мой колесо тихоходного вала.cdw
|
2 Мой промежуточный вал.cdw
|
Спецификация.pdf
|
эпюры быстроходного вала.frw
|
14 маслоуказатель.cdw
|
Similar materials
- 04.11.2022
- 26.05.2022
- 24.01.2023
- 09.05.2024
Free downloading for today
Update after: 15 hours 40 minutes